MAXX ECU GEN2 RACE
From
£1,710.00
MAXX ECU GEN2 RACE
Introducing MaxxECU GEN2 RACE – the ultimate engine control system for tuners and racing professionals.
Up to 12 Sequential Cylinders
550 kPa MAP sensor for 4.5 bar / 65 PSI of boost.
Waterproof IP68
WIFI and Bluetooth
The GEN2 RACE is engineered for high-performance engines that demand precision. With V8 support, dual wideband lambda, dual knock control, high-speed logging, and advanced tuning capabilities, it gives you the confidence to push harder. It comes with the intuitive MTune software for seamless tuning and real-time monitoring, plus full control with the wireless MDash Android app, taking your setup to the next level.
PLEASE GO TO www.maxxecu.com FOR MORE INFORMATION
Quantity
MAXX ECU GEN2 RACE TECHNICAL INFO
Target Engines of MaxxECU GEN2 RACE
All 1-12 cylinder engines (2/4-stroke)
Up to 12 cylinders fully sequentially
Up to 12 cylinders in wasted spark
MaxxECU GEN2 RACE inputs
8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.
24 Analog inputs (selectable pullups)
8 Exhaust Gas Temperature inputs (TYPE-K)
Dual wideband lambda (LSU 5.2/4.9/4.2)
Dual knock sensor input
MaxxECU GEN2 RACE outputs
16 injectors (Peak-hold high/low impedance) / GP outputs
12 IGN / GP outputs (selectable +5V/12V/GND)
8 GP Outputs (GND)
4 GP Outputs (+12V)
4 GP Outputs (H-bridge/E-Throttle)
MaxxECU GEN2 RACE technical
Superseal 1.0 connectors
550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, with BSP 1/8 thread
3-axis accelerometer (up to 8 G)
ARM dual core CPU
6-22V operating voltage
16GB internal log capacity, 1000Hz, all 2000+ channels
USB-C 480mbit/s (MTune PC communication)
USB-C 12mbit/s (tablet charging)
WIFI communication with MTune
Bluetooth connectivity with MDash
Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN transmission control
Resolution on ignition: 0.1 degrees
Resolution on injectors: 0.001 ms
Performs fuel and ignition calculations 3,000 times per second.
200Hz sampling rate on all EGT inputs
2000Hz sampling rate on analog/digital inputs
Weight: 700g
240x138x35mm including protruding connectors
Black powder-coated aluminium case
All inputs and outputs are safeguarded against overvoltage, reverse polarity, and short circuits.